Hydraulic Manifold Block NG10 (CETOP 5) – Single Station

A solid foundation for your hydraulic system. High-quality manifold (block) in NG10 size standard (CETOP 5). Designed for safe, leak-proof, and convenient mounting of spool-type hydraulic directional control valves. This is an essential component for building modern power units and upgrading systems in industrial and mobile machinery.

Why should you use this block in your system?

• Universal CETOP 5 standard (ISO 4401-05): The manifold is 100% compatible with NG10 solenoid valves and directional control valves from all leading manufacturers on the market (such as Bosch Rexroth, Parker, Vickers, Ponar Wadowice, Atos, or their replacements).
• Stress-free and clean service: This is the biggest advantage of using CETOP manifolds. Hydraulic hoses are permanently screwed directly into the block's threads. If a directional control valve fails, you simply unscrew four bolts from the top and replace the "block." No struggling with seized fittings, no depressurizing the system, and no need to drain oil from the pipes!
• Armored durability: The block is milled from high-grade material (steel/hydraulic cast iron), allowing it to easily withstand pressure surges and continuous operation under loads up to 315 bar.
• Mounting flexibility: Precisely manufactured flow channels guarantee minimal resistance (pressure drops), and appropriately spaced connection threads facilitate aesthetic and logical routing of lines.

Nominal size NG10

Valve connection standard CETOP 5 / ISO 4401-05 / DIN 24340-A10

Block type Single station (for 1 directional control valve)

Maximum operating pressure 315 bar (31.5 MPa)

Working port outlets Side / Bottom [Adapt to the model being sold]

Material Steel / Cast iron

Corrosion protection Phosphating / Black oxidizing (black/gray color)

The NG10 single-station manifold is ideal for:

• Building hydraulic power units and pump stations.
• Constructing control systems in hydraulic presses, injection molding machines, and CNC machine tools.
• Modernizing power hydraulics in heavy agricultural (tractors, chippers), forestry, and construction machinery.
• Expanding installations with additional working sections where a high oil flow (up to 120 l/min) is required.

Tip: For correct mounting of the directional control valve on the manifold, appropriate sealing O-rings are necessary (usually included with the valve) and 4 Allen screws (e.g., M6 x 40). Ensure the mounting surface is clean before attaching the valve.